Last visit was: 25 Apr 2024, 16:30 It is currently 25 Apr 2024, 16:30

Close

GRE Prep Club Daily Prep

Thank you for using the timer - this advanced tool can estimate your performance and suggest more practice questions. We have subscribed you to Daily Prep Questions via email.

Customized
for You

we will pick new questions that match your level based on your Timer History

Track
Your Progress

every week, we’ll send you an estimated GRE score based on your performance

Practice
Pays

we will pick new questions that match your level based on your Timer History

Not interested in getting valuable practice questions and articles delivered to your email? No problem, unsubscribe here.

Close

Request Expert Reply

Confirm Cancel
Verbal Expert
Joined: 18 Apr 2015
Posts: 28635
Own Kudos [?]: 33123 [5]
Given Kudos: 25177
Send PM
avatar
Intern
Intern
Joined: 14 May 2017
Posts: 3
Own Kudos [?]: 6 [0]
Given Kudos: 0
Send PM
avatar
Intern
Intern
Joined: 08 Dec 2017
Posts: 40
Own Kudos [?]: 67 [0]
Given Kudos: 0
Send PM
avatar
Intern
Intern
Joined: 15 Mar 2018
Posts: 32
Own Kudos [?]: 17 [0]
Given Kudos: 0
Send PM
Re: In the figure above [#permalink]
1
E is not the answer and no correct answer is given!

The question read the area of the circle without the two triangles is 80 pi. Not the area of the circle without the sector, both answers above are incorrect.

The area of the two triangles is 2 * ( 1/2 * r^2 * Sin ( Q)) where Q is the angle of the triangle's apex at the center of the circle.

So 20pi = r^2 * Sin (Q) .... Q = asin ( 0.2) = 11.537... thus a + b + c + d = 2* (180-11.537) = 336.926.
avatar
Intern
Intern
Joined: 08 Mar 2018
Posts: 11
Own Kudos [?]: 13 [0]
Given Kudos: 0
Send PM
Re: In the figure above [#permalink]
1
YMAkib wrote:
D=20 so the r=10. So the circle is 100pi.
Given that, the circle area without the two triangles is 80pi. So the area of the two triangles is 20pi.
Now simply, considering a triangle as a sector of the circle we can use the formula (theta/360)=(Sector area/circle area).
By solving, theta=36 degrees. So a sector creates an angle of 36 degrees in the center and leaving 144 degrees for other two angles of a triangle.
So for two triangles' we can get 144+144=288 degrees.

I am not getting 36 degrees for theta/360 = 20pi/100pi. Can you please explain how you got to 36?
Thank you
Verbal Expert
Joined: 18 Apr 2015
Posts: 28635
Own Kudos [?]: 33123 [5]
Given Kudos: 25177
Send PM
Re: In the figure above [#permalink]
4
1
Expert Reply
There are two versions of this question. I edited the question above changing is the shaded region that I suppose is the area inside the circle but OUTSIDE the two triangles.

Now, the radius is 10 and the area is 100 \pi. The area of the shadow region is \(\frac{80}{100} = \frac{4}{5}\) of the circle and the rest is \(\frac{1}{5}\) of the circle.

We do know that the central angle in a circle is always \(360\) and \(\frac{1}{5}\) of 360 is 72°.

\(a + b + c + d + 72 = 360\)

\(a + b + c + d = 288\)
avatar
Intern
Intern
Joined: 02 Jun 2018
Posts: 1
Own Kudos [?]: 0 [0]
Given Kudos: 0
Send PM
Re: In the figure above [#permalink]
Which area is the shaded one?
Verbal Expert
Joined: 18 Apr 2015
Posts: 28635
Own Kudos [?]: 33123 [0]
Given Kudos: 25177
Send PM
Re: In the figure above [#permalink]
Expert Reply
Unfortunately, the book reports this kind of graph.

It should be the area inside the two triangles.

regards
avatar
Manager
Manager
Joined: 02 Dec 2018
Posts: 74
Own Kudos [?]: 31 [0]
Given Kudos: 0
Send PM
Re: In the figure above [#permalink]
1
Carcass wrote:
Unfortunately, the book reports this kind of graph.

It should be the area inside the two triangles.

regards


I would suggest to edit the original post indicating that.
Verbal Expert
Joined: 18 Apr 2015
Posts: 28635
Own Kudos [?]: 33123 [0]
Given Kudos: 25177
Send PM
Re: In the figure above [#permalink]
1
Expert Reply
Done.

Thanks.
Verbal Expert
Joined: 18 Apr 2015
Posts: 28635
Own Kudos [?]: 33123 [1]
Given Kudos: 25177
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
1
Expert Reply
This was one of the most controversial questions due to the poor quality of the geometry figure.

Now I have updated with a good one figure.

Regards
avatar
Intern
Intern
Joined: 14 Jan 2019
Posts: 31
Own Kudos [?]: 20 [0]
Given Kudos: 0
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
1
Area of Sector: x/360 * πR^2
Two Sector was shaded so each sector = 80π/2 = 40π

x/360 * πR^2 = 40π
x=144

a+b=c+d=144

Since R=D/2=10 a=b=c=d

a=b=c=d=72

a+b+c+d=72*4=288
avatar
Supreme Moderator
Joined: 01 Nov 2017
Posts: 371
Own Kudos [?]: 442 [1]
Given Kudos: 0
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
1
Expert Reply
Carcass wrote:
This was one of the most controversial questions due to the poor quality of the geometry figure.

Now I have updated with a good one figure.

Regards



Hi carcass,

The question or the figure is still flawed. The answer would be 288 ONLY when you are looking at the area of 80 pi for all the area outside the two sector and not the area outside the triangle.
Verbal Expert
Joined: 18 Apr 2015
Posts: 28635
Own Kudos [?]: 33123 [1]
Given Kudos: 25177
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
1
Expert Reply
Thanks, Cethan.

However, the figure, the question, and the answer choices are reported as they are in Barron's book without typos or else. Faithfully.

Regards
avatar
Supreme Moderator
Joined: 01 Nov 2017
Posts: 371
Own Kudos [?]: 442 [0]
Given Kudos: 0
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
Expert Reply
Carcass wrote:
Thanks, Cethan.

However, the figure, the question, and the answer choices are reported as they are in Barron's book without typos or else. Faithfully.

Regards


I have corrected the figure. Hopefully it is clear and no more ambiguous as given by Barron's.
Thanks
avatar
Retired Moderator
Joined: 20 Apr 2016
Posts: 1307
Own Kudos [?]: 2214 [2]
Given Kudos: 251
WE:Engineering (Energy and Utilities)
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
2
Carcass wrote:
This was one of the most controversial questions due to the poor quality of the geometry figure.

Now I have updated with a good one figure.

Regards



@Carcass Plz can u look into the diagram attached

When the area of triangle is said to \(10\pi\) are we actually considering the the area of the arc AB and arc AC? I didn't really understood the reasoning

However, this is how I solved, @Carcass kindly provide ur valuable feedback::

Let first find the angle COA and angle DOB

i.e. \(\frac{{\angle COA}}{360} = \frac{{40\pi}}{{100\pi}}\) (each shaded area is 40 pi and the area of the circle is 100 pi)

or \(\angle COA = 144\)

Now \(\angle COD = 180 -144 =36\) (DA is the a straight line and diameter of the circle)

Similarly it can be proved \(\angle AOB = 36\)

Hence for the two \(\triangle\)'s combined

it can be written as \(a + b + 36 + c + d + 36 =360\)

or \(a + b + c + d = 288\)
Attachments

#GREpracticequestion In the figure above, the diameter of the circle is 20.jpg
#GREpracticequestion In the figure above, the diameter of the circle is 20.jpg [ 15.74 KiB | Viewed 9876 times ]

Verbal Expert
Joined: 18 Apr 2015
Posts: 28635
Own Kudos [?]: 33123 [0]
Given Kudos: 25177
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
1
Expert Reply
This question clearly has a bit of a flaw in its wording. Certainly is that the letters to pinpoint the shaded area by Chetan came in handy.

However, I always try to look at the bright side of the story and stretch my mental muscles.

If we look at the original graph as it has been provided by the book and using logic, the solution will be easier. Of course, your solution is elegant and fine, though the arcs way to solve it I guess is a bit cumbersome. I always try to go down the road straight.

Attachment:
shot39.jpg
shot39.jpg [ 18.31 KiB | Viewed 9779 times ]


Now, few easy steps

  • the stem says the diameter is 20 so the radius must be 10.
  • If the radius is 10 the entire area of the circle is \(100 \pi\)

At this point, the stem also says us that the shaded region is \(80 \pi\). At the time I didn't have the right graph and it looks like the following

Attachment:
shot40.jpg
shot40.jpg [ 11.03 KiB | Viewed 9766 times ]


Even having this graph, is impossible to think that the shaded area is inside the isosceles triangles. it must be the outside of them. As it turns out, it is the rest of the circle. The total area is \(100 \pi\) so having \(80 \pi\) the latter represents 80% of the entire area.

From this, the area of the triangles is \(\frac{20}{100} = \frac{1}{5}\) of the entire area.

From this, we do know that inside an isosceles triangle, two sides are equal. The triangles inside the circle have the two major sides = 10. Therefore, the four angles a - b - c - d are the biggest. However, which is their measure ??

We do know that the sum of the angles is 180° if we take into account ONE triangle. Considering that the area of BOTH triangles is \(\frac{1}{5}\) of 360. We must divide 180 not by 5 BUT by 2.5 (considering ONE triangle). \(\frac{180}{2.5} = 72\)

Conclusion, \(a+b+c+d = 72*4 = 288\)
User avatar
GRE Prep Club Legend
GRE Prep Club Legend
Joined: 07 Jan 2021
Posts: 4421
Own Kudos [?]: 68 [0]
Given Kudos: 0
Send PM
Re: In the figure above, the diameter of the circle is 20 and th [#permalink]
Hello from the GRE Prep Club BumpBot!

Thanks to another GRE Prep Club member, I have just discovered this valuable topic, yet it had no discussion for over a year. I am now bumping it up - doing my job. I think you may find it valuable (esp those replies with Kudos).

Want to see all other topics I dig out? Follow me (click follow button on profile). You will receive a summary of all topics I bump in your profile area as well as via email.
Prep Club for GRE Bot
[#permalink]
Moderators:
Moderator
1085 posts
GRE Instructor
218 posts

Powered by phpBB © phpBB Group | Emoji artwork provided by EmojiOne